> ## Knowledge Base Index
> Fetch the complete knowledge base index at: https://docs.fysetc.com/sitemap.xml
> Use this file to discover available pages before exploring further.
> Pure-Markdown content can be obtained by appending a '.md' suffix to the content URLs listed in the sitemap (without the trailing slash).

# 90° Heat Insert Adaptor

##  90° Angle Connector for Hot Melt Nut Press Head 

![](https://raw.githubusercontent.com/FYSETC/wiki.fysetc/main/docs/images/crisp/90-heat-insert-adaptor--90-angle-connector-for-hot-melt-nut-press-head.png)

## Assembly Instructions
![](https://raw.githubusercontent.com/FYSETC/wiki.fysetc/main/docs/images/crisp/90-heat-insert-adaptor--assembly-instructions-01.png)
![](https://raw.githubusercontent.com/FYSETC/wiki.fysetc/main/docs/images/crisp/90-heat-insert-adaptor--assembly-instructions-02.png)

## introduction：
1.Right-angle connector for hot-melt nut indenter, main material: brass
2.Easy & Precise Installation using  90° Angle Connector
Improved accessibility to install "around the corner" 
Quick & accurate installation of short and standard heat set inserts
![](https://raw.githubusercontent.com/FYSETC/wiki.fysetc/main/docs/images/crisp/90-heat-insert-adaptor--quick-and-accurate-installation-of-short-and-standard.png)


## Applicable machine：
Primarily compatible with hot-melt nut guns with M4 threaded gun heads.
It is internally equipped with one M4 female thread adapter and one M4 male thread adapter.

## Shop

[Fysetc.com](https://www.fysetc.com/products/hot-melt-nut-press-in-head-90-connector?_pos=79&_sid=afb2f8d0d&_ss=r)


## Tech Support

facebook group: https://www.facebook.com/groups/197476557529090/

Tech Support Email： hunter@fysetc.com 

Forum: https://forum.fysetc.com/