> ## Knowledge Base Index
> Fetch the complete knowledge base index at: https://docs.fysetc.com/sitemap.xml
> Use this file to discover available pages before exploring further.
> Pure-Markdown content can be obtained by appending a '.md' suffix to the content URLs listed in the sitemap (without the trailing slash).

# Changelog

# Known issue

1.  Instructions for use of motor connection wire:
    Z0 and Z3 motors need to use 3.5m connecting wires, Z1 motor uses 1.85m connecting wires, and the connecting wires of Z2 motor and B motor are swapped to solve the problem of short connecting wire of B motor. A Motor connection line remains unchanged
    
2. Update Notes

   
| Column | images | Installation location | Download Link |  |
| ---- |
| 1 | ![](https://raw.githubusercontent.com/FYSETC/wiki.fysetc/main/docs/images/crisp/venture-xl-changelog--known-issue-01.png) | Manual page 26 |  | The M3x40 motor mounting screws are a bit long, so you can use M3x38 instead, or add M3 washers and use M3x40 for installation. |
| 2 | ![](https://raw.githubusercontent.com/FYSETC/wiki.fysetc/main/docs/images/crisp/venture-xl-changelog--known-issue-02.png) | Manual page 27 |  | The M3x40 motor mounting screws are a bit long, so you can use M3x38 instead, or add M3 washers and use M3x40 for installation. |
| 3 | ![](https://raw.githubusercontent.com/FYSETC/wiki.fysetc/main/docs/images/crisp/venture-xl-changelog--known-issue-09.png) | Manual page 43 |  | Added 4 pcs hot bed thermal fuse |
| 4 | ![](https://raw.githubusercontent.com/FYSETC/wiki.fysetc/main/docs/images/crisp/venture-xl-changelog--known-issue-03.png) | Manual page 48 | [here](https://github.com/FYSETC/Venture_XL/blob/main/STLs/Need%20to%20print%20the%20document%20yourself/Stealthburner/Chain_Anchor_3_Hole_V2_Trident.STL) |  |
| 5 | ![](https://raw.githubusercontent.com/FYSETC/wiki.fysetc/main/docs/images/crisp/venture-xl-changelog--known-issue-04.png) | Manual page 48 | [here](https://github.com/FYSETC/Venture_XL/blob/main/STLs/Need%20to%20print%20the%20document%20yourself/Stealthburner/SB_Dragon_Cutting_Printhead_Back.STL) |  |
| 6 | ![](https://raw.githubusercontent.com/FYSETC/wiki.fysetc/main/docs/images/crisp/venture-xl-changelog--known-issue-05.png) | Manual page 49 | [here](https://github.com/FYSETC/Venture_XL/blob/main/STLs/Need%20to%20print%20the%20document%20yourself/Stealthburner/%7Ba%7DShuttle_x1.STL) |  |
| 7 | ![](https://raw.githubusercontent.com/FYSETC/wiki.fysetc/main/docs/images/crisp/venture-xl-changelog--known-issue-06.png) | Manual page 50 | [here](https://github.com/FYSETC/Venture_XL/blob/main/STLs/Need%20to%20print%20the%20document%20yourself/Stealthburner/SB_Dragon_Cutting_Printhead_Front.STL) |  |
| 8 | ![](https://raw.githubusercontent.com/FYSETC/wiki.fysetc/main/docs/images/crisp/venture-xl-changelog--known-issue-07.png) | Manual page 52 | [here](https://github.com/FYSETC/Venture_XL/blob/main/STLs/Need%20to%20print%20the%20document%20yourself/Stealthburner/%5Bo%5D_stealthburner_LED_carrier_rev2.STL.stl) |  |
| 9 | ![](https://raw.githubusercontent.com/FYSETC/wiki.fysetc/main/docs/images/crisp/venture-xl-changelog--known-issue-08.png) | Manual page 53 | [here](https://github.com/FYSETC/Venture_XL/blob/main/STLs/Need%20to%20print%20the%20document%20yourself/XY_Joints/%5Ba%5D_xy_joint_cable_bridge_2hole.stl.stl) |  |
| 10 | ![](https://raw.githubusercontent.com/FYSETC/wiki.fysetc/main/docs/images/crisp/venture-xl-changelog--known-issue-01.jpg) |  |  | Motor line repair |
| 11 | ![](https://raw.githubusercontent.com/FYSETC/wiki.fysetc/main/docs/images/crisp/venture-xl-changelog--known-issue-02.jpg) | Manual page 59 | [here](https://github.com/FYSETC/Venture_XL/blob/main/STLs/Need%20to%20print%20the%20document%20yourself/Under%20Floor%20Wire%20Cover/Under%20Floor%20Wire%20Cover_1_x1.STL)  [here](https://github.com/FYSETC/Venture_XL/blob/main/STLs/Need%20to%20print%20the%20document%20yourself/Under%20Floor%20Wire%20Cover/Under%20Floor%20Wire%20Cover_2_x1.STL) | Add bottom cable cover |

**Please provide the order number to contact customer service to collect the supplementary accessory package.**

3. Notice
Venture\_XL CAD need to use WinRAR to decompress, otherwise the file cannot be opened.

# Thanks to
Here I would like to express my gratitude and support to Esoterical、 RichardTHF and many others. Your suggestions have helped us a lot - you all have my most sincere thanks.