> ## Knowledge Base Index
> Fetch the complete knowledge base index at: https://docs.fysetc.com/sitemap.xml
> Use this file to discover available pages before exploring further.
> Pure-Markdown content can be obtained by appending a '.md' suffix to the content URLs listed in the sitemap (without the trailing slash).

# CREALITY X-axis Belt Tensioner

# CREALITY X-axis Belt Tensioner

## Product Introduction

![CREALITY X-axis Belt Tensioner](https://raw.githubusercontent.com/FYSETC/wiki.fysetc/main/docs/images/crisp/CREALITY%20X-axis%20Belt%20Tensioner.jpg)

Product name：CREALITY X-axis Belt Tensioner

Material：Aluminum alloy

Weight:56g

## Applicable machine：
Ender-3、 Ender-3 pro、CR-10、 CR-10S、CR10 pro、CR10 V2、Ender-5 3D Printer、Other 2020V profiles, etc .

## Features

* It can adjust the belt tightness, improve movement accuracy, and improve printing quality
* Metal material, strong and stable, long service life
* Easy to install.


## Assembly steps

You can watch  [the assembly video](https://www.youtube.com/watch?v=Ch7mA2F4kJE).Or follow the steps to install.

steps 1：Check if the material is correct according to the picture.
![ED3X01](https://raw.githubusercontent.com/FYSETC/wiki.fysetc/main/docs/images/crisp/ED3X01.jpg)
steps 2：Install M4X25 screws.
![ED3X02](https://raw.githubusercontent.com/FYSETC/wiki.fysetc/main/docs/images/crisp/ED3X02.jpg)
steps 3：Install pulley.
![ED3X03](https://raw.githubusercontent.com/FYSETC/wiki.fysetc/main/docs/images/crisp/ED3X03.jpg)
![ED3X04](https://raw.githubusercontent.com/FYSETC/wiki.fysetc/main/docs/images/crisp/ED3X04.jpg)
steps 4：Install the front and rear side panels.
![ED3X05](https://raw.githubusercontent.com/FYSETC/wiki.fysetc/main/docs/images/crisp/ED3X05.jpg)
steps 5：Install the thumb nut.
![ED3X06](https://raw.githubusercontent.com/FYSETC/wiki.fysetc/main/docs/images/crisp/ED3X06.jpg)
steps 6：Install the boat nut.
![ED3X07](https://raw.githubusercontent.com/FYSETC/wiki.fysetc/main/docs/images/crisp/ED3X07.jpg)

## Attention

Refer to the assembly tutorial to avoid installation errors.

## FAQ

1. Q: How to install to my 3D printer? A: You can watch  [the assembly video](https://www.youtube.com/watch?v=Ch7mA2F4kJE).

## Attachments


## Shop

---

*  [Aliexpress](https://www.aliexpress.com/item/32991702381.html?spm=2114.12010615.8148356.35.1a6b57e9NkmbjQ).
* [Amazon](https://www.amazon.com/FYSETC-Synchronous-Straighten-Tensioner-Accessories/dp/B07RXY6FBV/ref=sxin_7_ac_d_pm?ac_md=2-1-QmV0d2VlbiAkMTUgYW5kICQxMDA%3D-ac_d_pm&crid=2TTBK7ZBAO2QH&cv_ct_cx=fysetc&dchild=1&keywords=fysetc&pd_rd_i=B07RXY6FBV&pd_rd_r=e510cda6-bc71-4c42-a8bd-70a16d697eda&pd_rd_w=esRb8&pd_rd_wg=21eva&pf_rd_p=6fa2c4b2-cf77-4ff1-a22d-406e154f5c4b&pf_rd_r=5K8R06FZ2XPY09DMQKWG&psc=1&qid=1595231335&sprefix=FYS%2Caps%2C370&sr=1-2-22d05c05-1231-4126-b7c4-3e7a9c0027d0).

## Tech Support

facebook group：[https://www.facebook.com/groups/197476557529090/](https://www.facebook.com/groups/197476557529090/)

Tech Support Email： hunter@fysetc.com 

Forum：[https://forum.fysetc.com/](https://forum.fysetc.com/)