> ## Knowledge Base Index
> Fetch the complete knowledge base index at: https://docs.fysetc.com/sitemap.xml
> Use this file to discover available pages before exploring further.
> Pure-Markdown content can be obtained by appending a '.md' suffix to the content URLs listed in the sitemap (without the trailing slash).

# FYSETC Paneldue 5i/7i

![FYSETC Paneldue 5i](https://resource-wangsu.helplook.net/docker_production/r1hy6v/article/xd4iHYGl/6a8c42ec38743.png)
### Product Introduction
The PanelDue 5i/7i is colour touch screen controller for the Duet and other 3D-printing electronics that support it. This integrated version is a custom-made high-quality 5/7 inch TFT LCD panel from a leading manufacturer.

### Features
* Resolution of  800×480 pixels on a 5/7 inch LCD.
* 5V power from host 3D printer controller.
* 2-wire async serial interface with 3.3V signal level (5V tolerant input).
* Connections to the onboard micro SD card socket as well as the PanelDue serial and power connections are all available via a 10-way ribbon cable.  A 300mm long ribbon cable (maximum recommended length) is supplied.
* 4-wire cable to connect the PanelDue to your controller board for the serial and power connections. A 300mm long cable is also supplied (maximum recommended length).

### Application
RepRap Firmware based 3D printers or other CNC machines.

### Wiring

#### 4 Way Cable
A Fysetc PanelDue can be connected to connector IO\_0 using a 4-core cable wired like the one shown in the images below. The 4-wire cable supplied with the Fysetc PanelDue has a 4-way JST XH on one end and 4 individual Dupont connectors on the other.
The 4-wire cable does not allow access to the SD card socket on the PanelDue.

#### Ribbon Cable
Connect a 10-way ribbon cable between the socket on the Fysetc PanelDue and compatable socket on the mainboard in use, such as the [Fysetc Big Dipper](https://wiki.fysetc.com/docs/BIGDIPPER). It supports use of the SD card slot while using this connection type. 
The connector is a standard 10 pin 2 row 2.54mm pitch box connector that accepts IDC connectors for 1.27mm ribbon cable.
![Wiring](https://resource-wangsu.helplook.net/docker_production/r1hy6v/article/xd4iHYGl/6a8c4495865ee.png)
### Screen Mounts
A number of screen mounts can be found on [Printables](https://www.printables.com/search/models?q=tag%3Apaneldue).

### Firmware
Please see the Duet documentation for details of installing and updating the firmware for the display, [Installing and Updating PanelDue Firmware](https://docs.duet3d.com/User_manual/RepRapFirmware/Updating_PanelDue). 

### Configuration
Using the following gcode within the config.g
Firmware version 3.6.X and below
`M575 P1 S1 B57600                        ; Setup Paneldue`
Firmware version 3.7.X and up
`M575 P2 S1 B57600                        ; Setup Paneldue`

### Documents
[GitHub Repo](https://github.com/FYSETC/FYSETC-Paneldue-5i-7i)

### Where To Buy
[Fysetc Official AliExpress Store](https://www.aliexpress.com/item/33005303596.html)

### Technical Support Channels
[Support Email](support@fysetc.com)
[Fysetc Discord](https://discord.gg/4A5QDCYx)