> ## Knowledge Base Index
> Fetch the complete knowledge base index at: https://docs.fysetc.com/sitemap.xml
> Use this file to discover available pages before exploring further.
> Pure-Markdown content can be obtained by appending a '.md' suffix to the content URLs listed in the sitemap (without the trailing slash).

# Sparkx i7 LED Upgrade

# Sparkx i7 LED Upgrade
## Product Introduction
![](https://storage.crisp.chat/users/helpdesk/website/-/6/d/5/b/6d5b7015fb15d000/sparkxi7ledupgrade_1l5nn4g.png =651xauto)



An upgrade based on the design of   [**“HLS - Hackman Led System for Sparkx i7”**](https://www.crealitycloud.com/model-detail/hackman-led-system-sparkx-i7?profileId=6a018bdd50932b397544644d&ts=1782201795026) with simplified installation and wiring.
     

## Compatible Printers：
 Sparkx i7

## Assembly Steps

You can watch  [the assembly video](h) (Coming Soon).


## Usage Steps
### Step 1
You need to download the .stl files from our [GitHub](https://github.com/FYSETC/Sparkx-i7-Led-System), then print them.

![](https://raw.githubusercontent.com/FYSETC/wiki.fysetc/main/docs/images/crisp/sparkx-i7-led-system--step-1-01.png)

![](https://raw.githubusercontent.com/FYSETC/wiki.fysetc/main/docs/images/crisp/sparkx-i7-led-system--step-1-02.png)

### Step 2
Next, plug in the connector of the LED strip into the control board.

![](https://raw.githubusercontent.com/FYSETC/wiki.fysetc/main/docs/images/crisp/sparkx-i7-led-system--step-2.png)

### Step 3
Assemble according to the diagram, and install the control board into the printed shell from first step.

![](https://raw.githubusercontent.com/FYSETC/wiki.fysetc/main/docs/images/crisp/sparkx-i7-led-system--step-3.png)

### Step 4
Install the printed part “8mm/5mm LED strip bracket.STL” into the slot below the X-axis and secure it using M3x6 screws.
![](https://raw.githubusercontent.com/FYSETC/wiki.fysetc/main/docs/images/crisp/sparkx-i7-led-system--step-4.png)

### Step 5
Install the printout “block-bottom-G.STL、block-top.stl” into the metal slot on the left side of the X-axis and M3x12mm secure it with screws.

![](https://raw.githubusercontent.com/FYSETC/wiki.fysetc/main/docs/images/crisp/sparkx-i7-led-system--step-5.png)

### Step 6
Secure the power cord with a cable tie.

![](https://raw.githubusercontent.com/FYSETC/wiki.fysetc/main/docs/images/crisp/sparkx-i7-led-system--step-6.png)

### Step 7
Plug the power module into the USB port of the machine.
After installation, touch the left side to switch the LED on or off.

![](https://raw.githubusercontent.com/FYSETC/wiki.fysetc/main/docs/images/crisp/sparkx-i7-led-system--step-7.png)

## Attention

Refer to the assembly tutorial to avoid installation errors.


## FAQ

1. Q: How do I install into my 3D printer?
   A: You can watch [the assembly video](h) (Coming Soon).
2. Q：Does the installation require additional printed fixtures?
   A：Yes，Please click below to download or scan the QR code to download the files.

## Attachments
* [GitHub Repo](https://github.com/FYSETC/Sparkx-i7-Led-System)
   ![](https://raw.githubusercontent.com/FYSETC/wiki.fysetc/main/docs/images/crisp/sparkx-i7-led-system--attachments.png)

## Shop

---

*  [Aliexpress](https://www.aliexpress.com/item/1005012653909306.html).
  

## Tech Support

Disord Server: https://discord.gg/RXuwedUkB9

Facebook Group：https://www.facebook.com/groups/197476557529090/

Tech Support Email： support@fysetc.com