• Retracting Spool Holder

  Assembly and operation guide for the retracting spool holder, covering heat-set inserts, screws, seals, hygrometer installation, filament loading, and spool-holder usage.Few readers

• Prusa mini BMG V1 Extruder

  Product name：Prusa mini BMG V1 Extruder Material：printed matter Weight:85gFew readers

• PSF Feedback Sensor

  PSF Feedback Sensor Product Introduction During extended periods of synchronized printing without intervening tool changes, alignment between extruder and gear steppers can gradually drift. this mismatch accumulates and can lead to print artefacts caused by missed steps or suboptimal extrusion rates. Proportional sync-feedback sensors address this using linear Hall Effect sensors (or similar), providing real-time analog positional telemetry to Happy-Hare allowing it to continuously adjustFew readers

• PRUSA-MK3S-Bear-Upgrade-kit

  Database for the FYSETC Prusa MK3S Bear Upgrade v2.0, including STL updates, assembly tutorials, video instructions, community resources, and support links.Few readers

• Ender3 Y-axis Belt Tensioner

  Product name：Ender3 Y-axis Belt Tensioner Material：Aluminum alloy Weight:66gFew readers

• Ender 5 3D printer Direct Drive Extruder Plate

  Product name：Ender 5 3D printer Direct Drive Extruder Plate Material：Aluminum alloy Weight:83.5gFew readers

• Ender3 belt double Z upgrade kit

  Product name：Ender3 belt double Z upgrade kit Material：Metal、Spcc Weight:650gFew readers

• Ender 3 3D printer Direct Drive Extruder Plate

  Product name：Ender 3 3D printer Direct Drive Extruder Plate Material：Aluminum alloy Weight:71.5gFew readers

• CREALITY X-axis Belt Tensioner

  Product name：CREALITY X-axis Belt Tensioner Material：Aluminum alloy Weight:56gFew readers

• CREALITY CR10 Y-axis Belt Tensioner

  Product name：CREALITY CR10 Y-axis Belt Tensioner Material：SPCC Weight:91gFew readers

• FLASHFORGE_AD5X Enclosure Kit

  Product outline drawingSome readers

• FYSETC-QuattroBox

  FYSETC project database for the QuattroBox suite, documenting hardware modifications, printed parts, configuration information, frequently asked questions, purchase links, and technical support.Some readers

• Adventurer_AD5M_AD5M Pro_AD5X Light Board

  Installation and upgrade guide for the AD5M, AD5M Pro, and AD5X light board, including video instructions, system and firmware upgrade notes, assembly, wiring, usage, and safety cautions.Few readers

• Adventurer AD5M Series Camera

  Installation and usage guide for the universal camera on Flashforge Adventurer AD5M and AD5M Pro printers, including mounting, ZMOD firmware requirements, camera activation, and FlashPrint playback steps. AD5X is not currently supported.Popular

• X1P1S door hinge

  The original hinge allows a maximum opening angle of 120 degrees. By replacing the original hinge, the door opening angle can be extended to 180 degrees or even 270 degrees, preventing users from accidentally damaging the glass door. The all-metal material is durable and reliableFew readers

• Creality K1 MAX 8mm Graphite Build Plate & Heated Bed

  For Creality K1 MAX Upgraded Build Plate for Fast Heating and Ultra-flat 3d. Buying options Set 1: 1x Graphite plate Set 2: 1x Silicone heating pad + 1x 1.5mm Sticker Set 3: 1x Silicone heating pad + 1x 1.5mm Sticker + 1x Graphite platePopular

• 90° Heat Insert Adaptor

  1.Right-angle connector for hot-melt nut indenter, main material: brass 2.Easy & Precise Installation using 90° Angle Connector Improved accessibility to install "around the corner" Quick & accurate installation of short and standard heat set insertsFew readers

• Sparkx i7 LED Upgrade

  An upgraded based on the design of “HLS - Hackman Led System for Sparkx i7” and simplified the installation and wiring. Link: https://www.crealitycloud.com/model-detail/hackman-led-system-sparkx-i7?profileId=6a018bdd50932b397544644d&ts=1782201795026Few readers

• FC Product Manual

  Assembly and usage manual for the FC device, covering printer compatibility, printed parts and heat-set inserts, hygrometer and TPU-seal installation, spool-holder assembly, and operating steps.Few readers